NBNB75ILP9 BNC cable jack for panel mount, isolated Neutrik’s BNC cable jacks for panel mount offer a true 75 Ω design for serial and digital (HD) signals. The machined brass connector body provides an extremely rugged and non-abrasive connection over long term use. Suitable cables: Belden 1505A, Belden 8241F, Canare L4CFB, CommScope 5565, Draka 0.8/3.7 AF, Draka 755-801 (803, 804), Gepco VPM2000, Suhner S04263, Sommer 600-0451 Crimp size: Pin: 1.6 mm (square) Shield: 6.47 mm (hex) Features & Benefits Gold plated center contact True 75 Ω design meets the stringent HD requirements Isolated panel mount (solves potential grounding problems and prevents common-mode influence with other connections conducted over the same panel ground potential) Specifications Connection Type BNC 75 Ω Gender female Electrical Contact resistance ≤ 3 mΩ (inner) Contact resistance ≤ 2 mΩ (outer) Dielectric strength 1,5 kVdc Impedance 75 Ω Insulation resistance > 5 GΩ Rated voltage <50 V VSWR ≤1.050/>32 dB up to 1 GHz ≤1.065/>30 dB up to 2 GHz ≤1.100/>26 dB up to 3 Ghz Mechanical Cable O.D. 4 – 7.7 mm Cable retention > 30 N (Center) Crimp size 6,47 Hex crimp (shield) acc. IEC 60803 (die designation E) Crimp size (pin) 1,6 Square crimp (pin) acc. IEC 60803 (die designation 2) Insertion force < 25 N Lifetime > 1000 mating cycles Locking device Bayonett Mounting direction Rear mounting Chassis shape 12.7 mm Cable anchoring Jacket crimping Material Contacts Brass (CuZn35Pb2), 0.2 µm AuCo (Center contact) Insert PTFE Shell Brass (CuZn39Pb3) Shell plating Optalloy® Environmental Temperature range -30 °C to 85 °C Contact crimpability Complies with IEC 60803 and IEC 60352-2
