NBNC75BJP9X The rearTWIST UHD BNC connectors are specifically designed for high resolution video signal transmissions. Due to the unique insulator and contact pin design, the connectors feature low return loss values for 4K and 8K signals. Features & Benefits Optimized contact pin and insulator design for UHD-data transmissions Proven rearTWIST technology Swiss antraloy plating Fully compatible with conventional BNC chassis connectors Improved return loss values at high frequencies Optimized Return Loss Due to optimized insulator design and reduced crimp diameter from center pin the Neutrik rearTWIST UHD BNC connector achieves increased headroom compared to conventional BNC connectors and offers additional return loss reserve for potential impedance deviations resulting from cable bending, incorrect connector assembly or faulty connection interfaces without signal interruption. Crimp Dimensions In order to achieve optimum return loss values at high frequencies the crimp dimension of the contact pin has been reduced. Pin: 1.07 mm (square) Shield: 6.47 mm (hex) Crimp die: DIE-R-BNCX-PDG Approved Cables To guarantee high performance for each cable-connector combination at high frequencies Neutrik measured common COAX cables which are specifically designed for ultra high definition transmission (UHD). Find all approved cables listed below. Suitable cables:Belden 1505F, Bryant BD SD53F, Cordial CVI 08-37 HD UHD optimized cable: Klotz VD083LP 0.8L/3.7DZ Specifications Connection Type BNC 75 Ω Gender male Electrical Contact resistance ≤ 3 mΩ (inner) Contact resistance ≤ 2 mΩ (outer) Dielectric strength 1.5 kVdc Impedance 75 Ω Insulation resistance > 5 GΩ Rated voltage < 50 V VSWR ≤1.06 / >30 dB up to 6 GHz ≤1.13 / >24 dB up to 12 GHz ≤1.22 / >20 dB up to 18 GHz Mechanical Cable O.D. 6.3 mm Cable retention > 30 N (center) Crimp size 6.47 Hex crimp (shield) Crimp size (pin) 1.6 square crimp Insertion force < 25 N Lifetime > 1000 mating cycles Locking device Bayonett Cable anchoring Jacket crimping Material Contacts Brass (CuZn35Pb2), 0.2 µm AuCo (center contact) Shell Brass (CuZn39Pb3) Shell plating Antraloy Insert PP Environmental Temperature range – 30 °C to 85 °C Contact crimpability Complies with IEC 60803 and IEC 60352-2
